Medium Frequency Welding Heating Induction Equipment Push Elbow
Production Description of Medium Frequency Welding Heating Induction Equipment Push Elbow
The motherboard adopts CAD technology, integrated circuit board, low-fault-rate, easy-manipulating,effortless maintenance.
Zero voltage starts up softly, high initial over, no impact for the electric network.
Apply to melting ferrous metal and non-ferrous metal like copper, aluminum, brass, steel,iron,stainless steel etc...
Turn on and turn off easily,and power failure.
Adopt constant power to control the circuit, maintain constant power while malting, and keep faster melting rate.
Set up over voltage, over current and water deficient protector, and run safely.
Medium Frequency Welding Heating Induction Equipment Push Elbow Technical Parameter :
| Power | Input Power | Output Power | Cool Water | Cooling | Out-Dimension | Weight |
| Model | (V) | (KW) | (T/h) | Water Pressure | (mm)(L×W×H) | (KG) |
| | | | | (Mpa) | | |
| KGPS60 | 380 | 60 | 2.5 | 0.25 | A750×800×1980 | 400 |
| KGPS100 | 380 | 100 | 3 | 0.25 | A750×800×1980 | 480 |
| KGPS160 | 380 | 160 | 5 | 0.3 | B750×800×1980 | 600 |
| KGPS250 | 380 | 250 | 5 | 0.3 | B-1400×800×1980 | 700 |
| KGPS400 | 380 | 400 | 6 | 0.4 | C-1800×800×1980 | 850 |
| KGPS500 | 380 | 500 | 6 | 0.4 | C-1800×800×1980 | 1000 |
| KGPS750 | 380 | 750 | 8 | 0.4 | C-1800×800×1980 | 1250 |
| KGPS1000 | 380 | 1000 | 10 | 0.4 | D-2200×800×2100 | 1250 |
| KGPS1500 | 380 | 1500 | 12 | 0.4 | E-3600×800×2100 | 1750 |
| KGPS2000 | 380 | 2000 | 18 | 0.4 | E-3600×800×2100 | 2000 |
| KGPS2500 | 380 | 2500 | 20 | 0.4 | E-3600×800×2100 | 2500 |
| KGPS3200 | 380 | 3200 | 35 | 0.4 | E-3600×800×2100 | 2800 |
| KGPS6500 | 380 | 6500 | 50 | 0.4 | F-5200×800×2100 | 3500 |
| Other customized specifications are welcomed. |
APPLICATIONS of our Medium Frequency Welding Heating Induction Equipment Push Elbow:
A. Heating (hot forging, hot fitting and smelting):
B. Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
C. Welding (braze welding, silver soldering and brazing)
It mainly aims to melt the solder by heating it to a certain temperature for the purpose of connecting two types of metals of the same material and different
D. Annealing (tempering and modulation)
Electric Board
Main control circuit board as the main part of the machine, we made in their research and development, and adopted by the company and built since the automatic welding and testing equipment to ensure that each set of machine can achieve the best effect, and we have main control board in stock lone time, can satisfy the parts supply problems.
Induction coils
The induction coil inside the furnace body is treated with two insulations. The first spray of high temperature insulation paint. The second round of glass fiber tape. The service life of the treated furnace lining and induction coil will increase by more than two times.
Features of the our Medium Frequency Welding Heating Induction Equipment Push Elbow :
• Easy operation:
A full time operator specially for power supply is not needed .There is only one switch for turning on or off and one power adjustment knob. After started, the only thing that needs to be done is rotating the power adjustment knob to the largest location, others are controlled by the device itself.
• Safety protection functions of induction melting furnace:
1. The main circuit and short circuit protection
2. SCR overvoltage protection
3. Main circuit phase fault protection
4. The main circuit phase loss protection
5. Low water pressure protection
6. SCR overcurrent protection
• Highly reliable electrical control board
In the operation, the 3-phase current is balanced. Due to the advanced design, the 3-phase power supply's sequence could be connected randomly. Moreover there is no limit to connect to capacitor cabinet and furnace. All of these jobs can be judged to be adapted automatically by the device itself. It makes the installation and maintenance very easily.
Advantages of Our Heiyan Medium Frequency Welding Heating Induction Equipment Push Elbow
1. Energy saving:
The power factor reaches 0.99 under the condition of full power output. The integrated circuit board is adopted and the current and voltage are adjusted internally. The core components are high performance, high density and large-scale ASIC integrated circuit produced in the United States, which are digitized. The rectifier trigger part does not need any adjustment, and has the advantages of high fraud reliability, high pulse symmetry, strong anti-interference ability and fast response speed.
2. Big reactor design:
Strong filtering ability, greatly reduce harmonic pollution to the grid, suppress the current mutation, protect the transformer.
3. Large section area of current carrying discharge:
Select 8×60 copper row, large cross-sectional area, strong current carrying capacity, reduce heat.
4. Cabinet uses RITTAL brand:
Durable and beautiful
5. Appliances: SCHNEIDER brand
6. Button: IDEC brand
7. Insulating plate:Durable and high insulation grade, beautiful
8. Water segregator: Stainless steel
9. Cooling water pipe: Specially customized, high temperature and high pressure
10. Inverter increase resistance and capacity absorption: it can effectively suppress the instantaneous oscillation and high-frequency current of operating overvoltage, so that the waveform of overvoltage becomes slow, the steepness and amplitude are reduced, plus the damping effect of resistance, so that the high frequency oscillation rapidly attenuates.
NOTE:
Please do not touch any exposeed electric components and induction coils when it is starting work .Please close system if repair or moving . Refuse electrocute!
Product Tags:
|
|
Integrated Circuit Board Heater Power Supply , Power Supply Source Low Fault Rate Images
|
